100' Kobrajet Pressure Washer Hose Gray | 100 Foot | Add Quick Connects

These are by far the best high pressure hoses we have ever tested. They do not kink and allow you to move easily around your vehicle while washing it!

We offer 3 options for each hose which you can select above:

1) No quick connects: the hose will have 3/8" male threaded ends on both sides.

2) With a stainless 3/8 coupler on ONE end. The other end with have a 3/8" male threaded end. (common setup for hose most 3/8" hose reels)

3) With stainless 3/8" couplers installed on both ends.

The couplers used are part number 24.0063 from MTM.

This non-marking hose now features a thicker inner wall to prevent gashes and ruptures and is great for any pressure washing application. Kobrajet is manufactured out of high quality components and assembled in the U.S using 'Bite the Wire' technology when installing the 3/8" rigid and swivel fittings. This technique guarantees that your hose ends will stay in place and will not rupture or blow off during pressure spikes. These advanced fittings also have a longer life with superior resistance to corrosion due to the salt spray test which yielded results of 125 hours before corrosion was detected; nearly twice the industry standard, meaning your hose will last longer, especially in abusive environments.

Kobrajet hose can handle temp spikes up to 310°F but constant run temperatures should not exceed 275°F

Specifications

• 4,000 PSI Max Pressure
• 275º F Max Temperature
• 3/8" Inside Diameter
• 5/8" Outside Diameter
• 3/8" Male NPT Swiveling Inlet
• 3/8" Male NPT Fixed Outlet
• Non-Marking Gray
• Rubber Bend Restrictors

Warranty Information and Technical Support Contact:

It is important you understand before purchasing an MTM Hydro brand product, the warranty is facilitated by Veloci Performance Products (the supplier/manufacturer of MTM Hydro brand products), which is the case with almost all tool and equipment purchases. Veloci warrants to the original purchaser of their pressure washing accessories that such products will be free of material and workmanship defects under normal use for the period of 90 days from purchase. The entire warranty policy can be view at the link below. In the very rare case of a warranty defect or failure with a high pressure part it will typically present itself with the first use. After the 90 day period any failure of a high pressure part is considered regular wear and tear.

Any technical issues, warranty returns or exchanges will be facilitated directly with the supplier/manufacturer, Veloci Performance Products. The Clean Garage will assist you in making contact with them and anything else within our power to make the process smooth for you should an issue arise. We suggest reviewing the manufacturers full warranty policy before purchase which can be found here: https://www.vppdealers.com/refunds

For general or customer support service related inquiries, call MTM at 866-686-4020