Active Premium Quick Connect Kit | 6 Stainless Fittings for M22 Hose

Please Note: This kit is made to use with the factory M22 14mm hose on the Active 2.0 and Active 2.3, it will also work with other pressure washer hoses that have female M22 14mm hose ends. 

The kit will make your factory active hose quick connect to the pump and on the other end to your factory active wand and can also be used with any aftermarket spray gun with a 3/8" plug.

If you are running or plan to run one of our Kobrajet hoses we would not suggest this kit as you will end up with fittings you do not need/can not use. For those hoses we would suggest following the clear guidance we have listed on each pressure washer page on what quick connects you should use.

The Active Pressure Washer Quick Connect Kit is our budget-friendly option to elevate your experience when using your Active Pressure Washer. This kit is usable for all M22-14mm rated pressure washers outside of the Active ecosystem. This QC kit meets the grueling industry standards of durability in terms of heat, expansion, and salt tests, making it over-built for the pressure and flow output of any electric pressure washer in the market.

The construction of the Active Quick Connect Kit is fully machined 304 stainless steel. This allows for smooth connections based on precision of the machining process and higher degree of resistance to corrosion.

The Active Quick Connect Kit is rated for a maximum of 4000 PSI operating pressure and 12 GPM of flow at a peak operating temperature of 212F enabling a broad operating range for any residential or commercial electric and gas-powered pressure washer.

The following quick connects are included:

• Threaded male 3/4” 11.5 TPI to male quick connect
• Threaded female 3/4" 11.5 TPI to female quick connect
• 2x threaded female M22-14 to male 3/8" quick connect
• 2x threaded male M22-14 to female 3/8" quick connect

Products Specification

Material: 304 Stainless Steel

Peak Pressure: 4000 PSI

Water Flow: 12 GPM

Max Temperature: 212 F