Name: The Clean Garage Spot Free Wash System 100 | Deionized Water DI Rinse | Bypass Head
Brand: Spot Free Wash
SKU: DI100BP
Price: 431.07 GBP
Availability: InStock
Rating: 5 (8 reviews)

Description

Product Reviews

Description

The Clean Garage Spot Free Wash System 100 | Deionized Water DI Rinse | Bypass Head

Say goodbye to water spots with our Spot Free Wash System! Our 100 systems come Pre-Filled with 1 Cubic Foot of virgin, high-grade, non-regenerated resin.

Stop paying for over priced cartridges, our systems use bulk resin that can be purchased by the cubic foot to refill. Making the longer term cost of our system much cheaper.

Our Bypass system allows you to easily turn the water treatment on and off. Simply turn both red dials inward to bypass the resin treatment. This means you can use DI water when you need it and unfiltered water when you don't which will prolong the life of your resin. We suggest using DI water water for your final rinse and to fill your buckets and foam cannon.

To set the system up you simply need 2 garden hoses: Your inlet hose (from your water source) connects to the left elbow(when facing the machine) labeled INLET/Downflow Inlet. Your outlet hose (going to your pressure washer or hose nozzle) connects to the right elbow(when facing the machine) labeled OUTLET/Upflow Inlet.

The Clean Garage Spot Free Wash system is an excellent use for a spot-free car wash, RV and plane washing, window cleaning and any application where a spot free rinse is required. This is not to be used for human consumption.

So how does it work and how long will it last?

How does the system work?

Our ultra pure deionization tanks used mixed bed DI resin to remove all spot causing minerals from the water fed to the tank. The water produced is an excellent use for a spot-free car and RV wash, window cleaning, and much more! Our system removes impurities from your water that can cause water spots. These impurities are called Total Dissolved Solids (TDS).

How long will the system last?

This is the number 1 question we get asked. The answer is based solely on the TDS of your feed water going into the system, which is measured in PPM. Once you have this number you can use our chart below to estimate how long one tank of resin will last you.

How do I find the PPM of my feed water?

Use a TDS meter to quickly and easily get this number. You can add one as an option above or buy one here: TDS EZ Meter | Measure Your Waters PPM | For The Clean Garage Spot Free Wash Systems

What happens when the resin in my tank is at the end of its life?

Since our system is filled with bulk resin it can easily be emptied and refilled when the time comes. Scroll down further for more info on refilling your tank.

We suggest grabbing one of our funnels made for the tanks for refilling: Spot Free Wash System Refill Funnel | For Filling DI Resin

How do I know when the resin needs to be replaced?

Use your TDS meter to measure the PPM on your treated water at least monthly. Once the PPM number starts to rise it is time to exchange your resin.

Where do I get replacement resin?

Right here is our 1 cubic foot refill: Spot Free Wash DI Rinse Replacement Resin | 1 Cubic Foot Refill for DI100

My house has a water softener. Is this different?

Yes it is. Home water softeners do not filter all TDS/Minerals so in most cases you will still have water spotting. A water softener will typically lower your feed waters TDS number which will make the resin last longer though.

Technical Specifications

Tank Dimensions:

Bare Tank Size: 8" diameter x 35" Tall
Height with Head on: 41"
Height with Bypass Connected: 43"
Depth with Bypass and tail pieces connected: 14"

Inlet/Outlet: 3/4" GHT (male) A female adapter is provided so you can use 2 standard hoses.

Capacity: The capacity of a DI tank is dependent on the quality of the water fed to the tank. The worse water fed to a DI tank, the less amount of gallons of pure water it will produce. The better the feed water, the more gallons of pure water the DI tank will produce. The following chart is to be used as a reference only, as to how many gallons a DI tank of this size will produce.

Service Flow Rate: 5.0 GPM Max

Max Pressure: 125psi

Max Temperature: 120 Degrees F

Common Sense Warning: These tanks are full of water and can not be allowed to freeze.

Resin Capacity: 1.00 Cubic Foot

Replacement Resin is Available Here: Spot Free Wash DI Rinse Replacement Resin | 1 Cubic Foot Refill for DI100

Capacities
The capacity of a DI tank is dependent on the quality of the water fed to the tank. The worse water fed to a DI tank, the less amount of gallons of pure water it will produce. The better the feed water, the more gallons of pure water the DI tank will produce. The following chart is to be used as a reference only, as to how many gallons a DI tank of this size will produce.

Resin Replacement Procedure

To replace your resin, first unscrew and remove the black head from your tank and follow the simple instructions below:

Remove Old Resin from Tank

Dump out the old resin from the DI tank. This can be done by turning it upside-down and using a garden hose and catching it in a bucket, or even using a wet/dry vacuum. The old resin is not considered hazardous.

Cover Center Pipe

You MUST keep the center pipe in the tank, and cover the top of it with a cap or tape before filling the tank again.

Fill the Tank Back Up

Fill the tank back up as full as you can with free DI resin. A funnel makes your job easier. Also you can use something like a rubber mallet or dead-blow hammer to gently hit hte side of the DI tank to pack the new resin in tighter. Save any unused resin for the next fill-up. Just keep it in the bag to keep it clean.

Clean and Reinstall Head

Make sure bottom of head and both O-ring sealing surfaces are clean and free of any resin or other particles. You can put silicone based O-ring lube, like Lube-111. Don’t use vaseline or petroleum jelly on the O-rings, that will break teh seals down over time.

Wash, Rinse, and Smile

Reinstall everything back together and you are ready to wash again!

Product Reviews

8 reviews Write a Review

5
Spot Free Wash is a Game Changer

Steven K on May 1st 2025

The Spot Free wash is a game changer! I have hard water and this unit brought it from 400ppm to 0ppm. I have it hooked up to my Active 2.3 and the valves make it super easy to switch from deionized to tap water quickly.
5
Just what I needed

Tyler Schrameck on Apr 2nd 2024

This was an easy install and perfect fit for my garage. I have really bad water and smaller filters would need replaced too often. Fast shipping and nice packaging. Thanks!
5
Initial TDS Test Results

Julio Vega on May 20th 2022

At the source for household water Via Bipass Valve TDS parts per million 152
5
Great Tank!

Chris on Nov 20th 2021

Finally decided to buy a tank after renting locally for 2 years. Works great! The 2 valve system works perfectly and does not leak. Tank shipped the day after I ordered. Thank you!!
5
Spot free car wash system

Thomas Zuber on Sep 28th 2021

Excellent product, took my TDS from 260 ppm to 0 ppm. No more spots when drying. Couldn’t be happier.
4
Spot Free Car Wash system

John on Sep 9th 2021

I like the unit and the way you can switch from deionized water to regular water however the only little problem I had using it for the first time was a small leak around the bottom of the head. That's the reason for the 4 stars instead of 5
5
Spot free system

DNX detailng on Jul 30th 2021

This really works. Makes my work a whole lot easier.
5
Great Spotless System

Brad on Sep 28th 2020

Very impressed with my spotless tank, works as advertised. Would really like the option for a wall mount or portable cart mount with it. I also purchased the bypass which was effortless to install and after unboxing was ready to wash within 5 minutes. Thank you!

Spot Free Wash

The Clean Garage Spot Free Wash System 100 | Deionized Water DI Rinse | Bypass Head

The Clean Garage Spot Free Wash System 100 | Deionized Water DI Rinse | Bypass Head

The Clean Garage Spot Free Wash System 100 | Deionized Water DI Rinse | Bypass Head

So how does it work and how long will it last?

Technical Specifications

Resin Replacement Procedure

Remove Old Resin from Tank

Cover Center Pipe

Fill the Tank Back Up

Clean and Reinstall Head

Wash, Rinse, and Smile

Spot Free Wash is a Game Changer

Just what I needed

Initial TDS Test Results

Great Tank!

Spot free car wash system

Spot Free Car Wash system

Spot free system

Great Spotless System

The Clean Garage Spot Free Wash System 50 | Deionized Water DI Rinse | Bypass Head

The Clean Garage Spot Free Wash Bypass System Replacement Elbow | For DI50BP & DI100BP

The Clean Garage Spot Free Wash System Refill Funnel | For Filling DI Resin

TDS 3 Meter | Measure Your Waters PPM | For The Clean Garage Spot Free Wash Systems

TDS EZ Meter | Measure Your Waters PPM | For The Clean Garage Spot Free Wash Systems

Recently Viewed

The Clean Garage Spot Free Wash System 100 | Deionized Water DI Rinse | Bypass Head

Write a Review

Spot Free Wash

The Clean Garage Spot Free Wash System 100 | Deionized Water DI Rinse | Bypass Head

The Clean Garage Spot Free Wash System 100 | Deionized Water DI Rinse | Bypass Head

The Clean Garage Spot Free Wash System 100 | Deionized Water DI Rinse | Bypass Head

So how does it work and how long will it last?

Technical Specifications

Resin Replacement Procedure

Remove Old Resin from Tank

Cover Center Pipe

Fill the Tank Back Up

Clean and Reinstall Head

Wash, Rinse, and Smile

Related Products

Recently Viewed